DCMC System Automation
Powered By: PicoSearch
Home > Electrical > TCI - KMP
Home Page
AC/DC Motors
Electrical Guide
Mechanical Guide
System Automation
Technical Services
Contact Us

  KLR
  KMP

TCI

KMP

The KMP transformer can also be used successfully in two-drive applications. (Where individual 6 pulse drives are fed by a comon transformer.) In this configuration, harmonic reduction will be a function of the operating points of the two drives. The better balanced the drives, the better the harmonic reduction.

KMP transformers are applied based on total horsepower of the load(s). Any combination of primary/secondary voltages is available. Products listed in the following tables are suitable for 460V/60Hz installations.

Select Standard
KMP Standard - Open
Part Number KVA HP (460V) Watts Loss Weight
KMP12AA11IN 11 7.5 967 155
KMP12AA15IN 15 10    
KMP12AA20IN 20 15 1750 200
KMP12AA27IN 27 20 2315 230
KMP12AA34IN 34 30 2141 343
KMP12AA40IN 40 35 2324 279
KMP12AA51IN 51 40 3111 425
KMP12AA63IN 63 50 2960 464
KMP12AA75IN 75 60 3160 593
KMP12AA93IN 93 75 4102 707
KMP12AA118IN 118 100 5476 790
KMP12AA145IN 145 125 5183 970
KMP12AA175IN 175 150 7358 1092
KMP12AA220IN 220 200 6680 1342
KMP12AA275IN 275 250 8764 1463
KMP12AA330IN 330 300 9097 1490
KMP12AA440IN 440 400 13855 1822
KMP12AA550IN 550 500    

Home | AC/DC Motors | Electrical Guide | Mechanical Guide | System Automation | Technical Services | Contact Us
Copyright 2002 DCMC System Automation, All Rights Reserved