|
|
 |
|
ABB Drives
DCS 400 - 20Amps - 820Amps at 230V - 500V
Click to Enlarge
ABB'S DCS 400 Digital Drive is an innovative design, using the latest semiconductor technology, which helps to reduce maintenance and increase product reliability and advanced software that enables extremely rapid commissioning.
The DCS 400's small size brings substantial space savings to the machine builders, allowing them to integrate more accessories within the same space. The compact design has been partly achieved by a fully integrated field exciter, which includes the field fuse and choke.
Based on new IGBT technology used for the field exciter, there is no need for a voltage-matching transformer.
The commissioning wizard, available on the control panel and the PC tool, makes start up of the drive extremely easy, by simply guiding the user through the start up procedure.
In addition, the DCS 400 contains application macros. By selecting a macro from a menu, the user can pre-select the software structure and I/O configuration, thus saving time and eliminating errors.
- Three line Multi-Lingual Alphanumeric display
- 1st line; 20 characters
- 2nd line; 12 characters
- 3rd line; status line for:
- Drive Operation
- Speed Command
- Drive and Motor Actual Value Display
- Parameter or Signal Display
- Fault History
- Fault Reset
- Parameter Changes
- Parameter Uploading and Downloading
- Parameter Set-Up
- Auto-tuning of Armature current and Field current circuit
- Automatic optimization of Speed controller and EMF regulator
- EMF, Tachometer, or Encoder Feedback
- Easy to Use Preset Application Macros
- Automatic phase sequence detection
- Adjustable Torque Limitation
- Standard I/O
- 2 Analog Inputs
- 8 Digital Inputs
- 2 Analog Outputs
- 5 Digital Outputs
- 1 Tachometer Input
- 1 Encoder Input
- Motor Protection Circuits
- Over Current
- Over Speed
- Tach Loss
- Field Loss
- Over Voltage
- Over Temperature (PTC)
- Quick Reverse
- 2 sets of Independently Adjustable Accel and Decel Ramps
- Linear Or "S" Curve Accel/Decel Ramps
- Ramp or Coast to Stop
- Power Supply for Communication Modules
- Memory Write Protection
- Fault detection
- User Definable Fault, Warning
- High Speed Fiber Optic Communication Interface
- PC Tool Kit for Commissioning and Maintenance of Converter
- Links to Several Automation Systems
- PROFI BUS
- MODBUS
- MODBUS Plus
- CS 31
- Line chokes
- EMC filter
- AC line fuses
|
|
