|
|
 |
|
ABB Drives
ACS 400 - 2Hp - 25Hp at 200V - 240V, 3Hp - 50Hp at 380V - 480V
Click to Enlarge
The ACS 400 series is a microprocessor based Pulse Width Modulated (PWM) adjustable frequency AC drive. The ACS 400 drive takes advantage of sophisticated microprocessor control and advanced IGBT power switching technology to deliver high-performance control of AC motors for a wide range of industrial applications.
With drives ranging from 3 to 50 HP, the ACS 400 series features a universal alphanumeric interface that "speaks" to the operator in plain English phrases, greatly simplifying set-up, operation, and fault diagnosis. The ACS 400 is also programmable in eleven other languages.
Each ACS 400 drive comes equipped with an extensive library of pre-programmed application macros, which at a touch of a button, allow rapid configuration of inputs, outputs, and performance parameters for specific applications to maximize convenience and minimize start-up time. The ACS 400 series can handle the most demanding industrial applications in an efficient, dependable, and economic manner.
- UL , cUL Listed and CE marked
- 30 Character Multi-lingual Alphanumeric Display For:
- Output Frequency (Hz)
- Speed (RPM)
- Motor Current
- Calculated % Motor Torque
- Calculated Motor Power (kW)
- DC Bus Voltage
- Output Voltage
- Heatsink Temperature
- Elapsed Time Meter (resettable)
- kWh and MWh Meter (resettable)
- Parameter Set-Up
- Fault Text
- Warning Text
- Supervision Text
- RS-485 Communications
- 2 Analog Inputs
- 5 Programmable Digital Inputs
- 1 Programmable Analog Output
- 2 Programmable Digital Relay Outputs
- Adjustable Filters On Analog Inputs and Outputs
- Input Speed Signals
- Current 0(4)-20mA
- Voltage 0(2)-10VDC
- Accel/Decel Contacts
- RS-485 Modbus Communications
- Start/Stop
- 2 Wire (Dry Contact Closure)
- 3 Wire (Momentary Contacts)
- Application of Input Power
- All Control Inputs Isolated From Ground and Power
- Protection Circuits
- Over Current
- Output Ground Fault
- Output Short Circuit
- Over Voltage
- Under Voltage
- Over Temperature
- Input Power Loss of Phase
- UL508C approved Electronic Motor Overload (12t)
- 2 Current Limit Circuits
- Automatic Electronic Reverse
- Quick Reverse
- DC Injection Braking at start and stop (programmable)
- Scalable Process Variable Display
- Auto Restart-Customer Selectable and Adjustable
- 2 sets of Independently Adjustable Accel and Decel Ramps
- Linear Or "S" Curve Accel/Decel Ramps
- Ramp Or Coast To a Stop
- Programmable Maximum Frequency To 250Hz
- Integral Programmable PID Setpoint Controller
- 7 Preset Speeds
- 2 Critical Frequency Lockout Bands
- V/Hz Shape
- Start Functions
- Ramp
- Flying Start
- Automatic Torque Boost
- Automatic Torque Boost with Flying Start
- IR Compensation
- Slip Compensation
- Automatic Extended Power Loss Ride Through (selectable)
- DC Bus Choke
- NEMA12
- Dynamic Braking Kits
- RFI Filters
- Drives Windows Software
- DDCS Link
- RS232/485 Adapter
- Fieldbus Adapter Modules
- DeviceNetTM
- Interbus-S
- Modbus Plus
- Profibus
|
|
