|
|
 |
|
ABB Drives
ACS 140 - 1/2Hp - 3Hp at 230V, 1Hp - 3Hp at 480V
Click to Enlarge
The ACS 140 series is a microprocessor-based Pulse Width Modulated (PWM) adjustable frequency AC drive. The ACS 140 drive takes advantage of sophisticated microprocessor control and advanced IGBT power switching technology to deliver high-performance control of AC motors for a wide range of industrial applications.
With drives ranging from 1/2 to 3HP, each ACS 140 drive is available with a standard keypad panel that can be used on the drive cover, or remote mounted. The keypad can also be used to copy all drive parameters from one drive to another. The ACS 140 series can handle the most demanding industrial applications reliably, efficiently, and economically.
- UL Listed
- CUL Listed
- CE marking
- Control Panel Keypad
- 2 Analog Inputs
- 5 Programmable Digital Inputs
- 2 Programmable Relay Outputs
- 1 Programmable Analog Output
- Input Speed Signals
- Current 0(4)-20mA
- Voltage 0(2)-10VDC
- PID Setpoint Controller
- 8 Built-in Application Macros
- Start/Stop
- 2 Wire
- 3 Wire
- Application Of Input Power
- All Control Inputs Isolated From Ground and Power
- Protection Circuits
- Over Current
- Short Circuit
- Ground Fault
- Over Voltage
- Under Voltage
- Over Temperature
- Motor Overload Protection (l2t)
- Electronic Reverse
- 2 Critical Frequency Lockout Points
- 7 Preset Speeds
- 2 Independently Adjustable Accel and Decel Ramps
- DC Injection Braking
- Ramp Or Coast To A Stop
- Programmable Maximum Frequency To 250 Hz
- V/Hz Shape
- IR Compensation
- Linear Or "S" Curve Accel Ramp
- Auto Restart - Customer Selectable and Adjustable
- Start Functions
- Ramp
- Flying Start
- Torque Boost
- Sleep and Wake-up Mode
- Modbus Serial Communications
- Extended Control Panel Cable
- RFI Filters to meet CE requirements for First Environment
- Dynamic Braking Chopper and Resistor
- RS232/485 Serial Communication Interface Card
- Drive Tools programming software
|
|
